How to drain the water left in the water filter?
When you need to store the ITEHIL water filter, in order to prevent the residual water inside the machine from deteriorating and damaging the fliters, we need drain the water inside the machine before storage. Let's see how to do it.
The first step is to install the water outlet pipe of the machine, and place the water receiving container. Make sure the RO filter and the hybrid filter are correctly installed.
In the second step, you don't need to install the water inlet pipe, just start the operation directly (every time you start the machine, if there is water in the water inlet, the machine will automatically clean the inside of the machine.), when there is no water in the water inlet, the machine will automatically empty the residual water. Repeat 2-3 times until there is no water discharged from the water outlet, then it's ready to be stored. Don't worry that whether the RO filter will be damaged, the humid environment inside the machine is enough to keep the RO membrane well.
Mastering the correct storage method can greatly improve the service life of the product. For example, if the water filter is not used for a long time (more than two months) after using the water filter, it is necessary to drain the water inside the machine and store it. It may cause damage to the machine or the filter element if left unattended.